Replace Lock in UPVC Door
If you've got a upvc door lock that isn't working properly, you must call a professional locksmith. They are quick, efficient and will complete the task to a very high standard.
Changing a upvc barrel lock isn't difficult to do. You just need to know what is involved and follow the steps below.
Removing the Barrel Lock
uPVC windows and doors are very common in a wide range of homes. They let light enter the home and can be opened easily with the right key. The process of changing the barrel on the uPVC door is an easy task that takes only five minutes. It is a quick fix if you've lost your key, or if a tenant has left and has not returned it, or the barrel of the lock is damaged.
You will need to remove the screws that hold the handles first. The handles will be moved out of the way so that you can access the screws that hold the barrel of lock. It is important not to loosen the screws quickly because this could damage the handles.
After the screws have been removed, find the screw that holds the lock in place on the inside of your door. This screw stands out and is a different color than the screws on the door. Remove this screw with the Phillips screwdriver. Next, take the present key that is used for the lock and place it in the barrel. Turn it to the right as far as you can. This will release the barrel which makes it easier to open the door.
After loosening the screw, you are now able to break the pins that hold the Euro Cylinder. To do this, you will require strong pliers or mole grips. Grasp the protruding portion of the euro cylinder and bend it up and down, and from side to side. This will break the two support pins that hold it in place.
When the old cylinder is out, you can then begin the process of installing the new one. First, you'll need to determine the size of the lock cylinder to make sure you have ordered the appropriate replacement. You can do this by measuring the distance between the center of circular keyhole and the center square spindle. The measurement should be taken from the upper hole of the spindle.
Change the Cylinder
The primary locking mechanism is the euro cylinder. It is simple to replace and does not require a locksmith or handyman. In fact, if yours isn't antisnap or antibump, it should be changed to one with this protection built in. These are inexpensive and can help you save money and time in the event that your locks are compromised.
To begin you must open the door and stand in front of it so you can reach the screw for retaining the handle with your hand or a suitable tool. You can loosen this screw a little maybe a quarter-turn to get started.
Once this is done the cylinder should slide out easily as it is no longer fixed by the screw. Next, you'll need to decide on the size of the replacement cylinder you require. There are about 25 sizes available. You should bring your previous cylinder when you buy the new one to ensure it is the right size.
If you're not sure of the size, measure from the screw hole's center to the end of the cylinder. You can only be sure that you're buying the correct sized cylinders for your door made of upvc by measuring from the center of the screw hole to the end of the cylinder.
Install the new cylinder on your door the opposite way you removed the old one. It might be difficult to align the lock cam, but this is usually just an issue with alignment, and will eventually be sorted out.
It is now time to screw the long securing screw back into place. After that, you can test it to make sure that the cylinder is secure inside the door. You can now reconnect the handle to the door and then test it again. If everything is working as it should, your cylinder lock on your doors made of upvc has been replaced and you have added an extra layer of security for your home.
Change the Handle
There are many reasons why a door handle or door knob can become loose. This could be due to wear and tear of the handle itself or it can be caused by the square spindle in the handle getting worn out or damaged by excessive use or force. In this scenario, the door handle needs to be replaced.
It is essential that the door is propped open so it cannot close between taking the handle off and replacing it. Then, remove the screws from the interior face of the handle plate with the screwdriver. This will free your handle from the plate. Don't lose the screws, as you may have to replace them later.
After the handles have been removed, you will be able to access the cylinder lock within the door. The cylinder lock is round or bulb-shaped and is only used for multi-point locks on upvc and some aluminum doors. The procedure of changing the cylinder is similar to the process of changing the handle, however, you'll have to remove the old cylinder from the door and replace with a brand new one.
It is crucial to consider the dimensions of the replacement handle when choosing one. The handle should be the same size as the original because it must fit into the screws that hold the handle in place. The best place to begin is to refer to a size matrix that will list the most common sizes of replacement handles along with their keyhole center to handle plate distance.
It is also worth changing your handles for your Upvc doors to more secure ones such as a Sold Secure SS301 or a 2* Kitemark set of security handles. This will enhance the security of your house and make it easier to operate your door. These sets are a bit more expensive however the added security and peace mind is worth the cost. Repair My Windows And Doors don't want to have to repeatedly push the door handle upwards and downwards to open and close it.
Change the Lock
The lock on your uPVC can be a vulnerable point for burglars. Upgrade your uPVC to multipoint locking to make it more secure. This will include an open hook as well as deadbolts to deter burglars. You can get a professional locksmith to help you, but you can also do it yourself. The process is simple and simple. You'll only require just a few tools.
The first step is loosening the screws that are holding the handle. By using a screwdriver you can remove the screws and put them in a safe spot. You can then raise the handle and expose the screw that holds the cylinder. It is possible to remove the screw and replace it a new one. It is important to ensure that the screw is exactly the same size as the original. It must be aligned correctly with the barrel of the lock.
The process of changing the lock on your door made of uPVC can seem intimidating. You rely on it to protect your home, and mistakes could leave you without a way to open the door. If you know how, it's quite simple and is less expensive than contacting a professional locksmith.
You'll need to take off the faceplate inside the lock to switch the lock. You'll need to locate the screw inside the door and the retaining bolt outside the door. Once you have these screws in your hands, you are able to remove and replace the faceplate.
It is possible to replace the lock of your uPVC door for a variety of reasons. It could be a lost key, or a tenant moved out but did not return keys, or you need to improve the security of your home.
Anyone with a basic level of DIY skills can replace the locking mechanism made of uPVC. You'll need to examine the hinges that are inside the mechanism, which can be a challenge in the event that the lock is stuck. If the hinges are lubricated it is likely to be a simple repair. If you're not sure that it will be a simple fix, contact an expert.